Products & Services
Spot Weldable Strain Gages
The Model 4100/4150 Strain Gage has a 51 mm gage length (3000 µε range, 1 µε sensitivity) and is designed to measure strains in steel structures (4100) and on reinforcement bars (4150) where space may be limited. The gage is installed quickly and easily by means of a capacitive discharge spot welder or, for short-term use, with special epoxy adhesives; the latter method of attachment permits the use of this gage on concrete.
|Standard Range||3000 µε||3000 µε|
|Resolution||0.4 µε||0.4 µε|
|Accuracy¹||±0.5% F.S.||±0.5% F.S.|
|Nonlinearity||<0.5% F.S.||<0.5% F.S.|
|Temperature Range||-20°C to +80°C||-20°C to +80°C|
|Active Gage Length||51 mm||51 mm|
¹Accuracy of ±0.1% F.S. available with optional, individual calibration.